How to Recover a Dead Hard Disk? One Click Solution

If you find that your hard drive is not responding any longer and you are also hearing a noise of “biz biz” while attempting to boot, after which it tends to stop and you cannot access it all together,. In such conditions, it is quite likely that your hard disk has become “dead.” In addition, if you are looking for a solution to recover a dead hard disk, then read this complete blog.

Symptoms of a “Dead” Hard Drive

Common symptoms of a “dead” hard drive or a hard drive that doesn’t work at all are:

1. No Power or Spinning: When you turn on the computer or the hard drive, there is no sign of the hard drive spinning. It is quiet and inactive.
2. Drive Not Recognized: The operating system or BIOS, does not detect the hard drive. It does not appear in the list of connected drives and cannot be accessed in File Explorer.
3. No Sound: Some damaged hard drives may make clicking, squealing, or other unusual sounds, but a “failed” hard drive is usually silent.
4. No Response: There is no response when you try to access the drive. There is no indication that the drive is trying to read or write data.
5. No Lights or Indicators: If the unit has LEDs or indicator lights, they are not illuminated or show any activity.

Note that these symptoms may indicate a serious hard drive failure and are usually associated with a serious hardware problem.

How Do You Recover a Dead Hard Disk?

Part 1: Use the Basic Troubleshooting Tricks!

Immediately Stop using your system!

If you feel that the HDD is still in spinning mode, and you are also facing performance issues with it, then it is always better to stop using that hard drive as soon as it is feasible for you! Once turned off, do not attempt to turn it on again unless and until you take that to some professional repair service company.

Also read: Turn off Computer without Doing a Shutdown

Try to Plug It in Any Other Port or a Different Computer

If you are lucky enough to have your hard drive running on other computers, then be happy, the problem might not be necessary with your hard drive, it could be the cables or even the ports on your system! However, in unfortunate cases where the hard drive is not even running on any other system as well, you must knock on the doors of a commercial company.

Know the Hard Drive Components

• PCB: This is the circuit board, which is present mostly at the bottom of the drive and is generally green in color. It is responsible for controlling most of the functions of the drive, and along with that, it translates the HDD information into readable information.

 

• Platters: Platters are the thin disks, that save data. These mostly cause the noise that we hear when starting the car. Fixing platters is a professional’s job!

• Head Assembly: This is responsible for reading data off those platters. For repairing head assemblies too, professional-grade know-how, experience and good equipment are needed.

Analyze the Type of Sounds Coming from Your Hard Drive

It all depends on what sort of issue you are encountering; that would decide its fix! Also, as per the problem, the hard drive makes certain sounds. To identify the problem, the type of sound can help you crack it! Cross-refer your drive’s model with the type of sound that it is making to ensuring an accurate diagnosis. For example: in the case of clicking sound, it is most likely that the head assembly has a problem. As a matter of fact, most of these problems, which can be diagnosed by identifying the sounds coming out of the drive, mostly need professional help!

Also read: HDD Formatted by Mistake

Do Not Jump onto Any of the Seemingly Quick Do-It-Yourself Fixes

Some quick fixes tried every now and then, including freezing of the hard drive or trying to apply force onto it! It is quite strange, though, that some users might get success with these methods, but performing these short-term fixes is sure to lessen the chances of successful data recovery (using professional service) than they were in the first place before trying any such fixes. Even if results bear fruit, they are mostly short-term. Eventually, with these fixes, your hard drive will end up dying sooner or later!

Part 2: Recovering a Dead Hard Disk via File History

File history often backs up small changes to data on your hard drive. It also allows you to restore individual files, not all the data on your hard drive. This method allows you to select the data you need and restore it one by one. To restore File History, follow the steps below:

Way1: Restore from a Backup

1. Open Settings on your computer.
2. Scroll down to the Update & Security section and click Backup in the left menu.
3. Then click More options under Back up with File History.
4. In the pop-up window, click Restore files from an existing backup.
5. Select the files you want to restore from your corrupted or failed hard drive.
6. Once you’ve selected all the files you need, press the Recover button.
7. To set a new data recovery location, right-click the Recover button and select Restore to…

Way 3: Using CMD Option

You can run CHKDSK to check and repair bad sectors or corrupted files on your external hard drive.

1. Connect the hard drive to your computer or PC properly
2. Type CMD in the search box of the Start menu and click Run as administrator.
3. Type CHKDSK *: /F /R /X (* is the drive letter assigned to the hard drive in your operating system).
4. Once the process is complete, the results will be displayed in the window.

Part 3:Contact a Data Recovery Service Provider

Owing to its very intricate construction, the hard disk drive, when dead, makes professional hands the best hands for data recovery. So, don’t make any further delay in contacting a service provider that deals in data recovery from dead hard disk drives.

What should you do if your hard drive breaks down?

1. Stop using the hard drive. If you suspect that your hard drive is damaged, immediately stop all access attempts.
2. Ensure a stable environment: If you are dealing with an inactive hard drive, make sure that the environment is clean. Even a small amount of dust can damage the sensitive components of your hard drive.

Read Also: How to Hard Drive Not Detected in Windows 11, 10?

Make Your Pick and Stick with That Company!

Every time you try to open your hard disk drive for DIY fixes, the repair probability actually decreases further. Basically, it is a big problem for users: “how to recover a dead hard disk.” This is because when you open your hard drive, again and again, it gets exposed to harmful elements like dust, static electricity, and some other environmental hazards too. To minimize these risks, you must not seek multiple consultations from various recovery firms. Instead, choose one and stick to it! First, ensure that the company that you are picking is competent enough; and also find out about the tools they use for recovery processes. SysTools Data Recovery services are good to go!